Suche starten
Sign in

Here you get access for your webmail!

Enter your e-mail address:


Allen key holder

« Back
Allen key holder

Allen key holder with the matching Allen keys for the LockMeister Tremolo and for Schaller tremolos.

  • Installation on the rear side of the headstock.
  • Comes standard fitted with 2.5 mm and 3 mm wrench sizes.
  • By means of 2 locking screws smaller allen keys are also firmly held in place in the Allen key holder.

Technical drawing

To view the complete technical drawing, please use the download file.

Note: Acrobat Reader is required to view PDF files correctly!


Technical drawing

Note: Acrobat Reader is required to view PDF files correctly!

Here you will find some additional, useful information about our Schaller product catalog.


Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.


Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).