Suche starten
Sign in

Here you get access for your webmail!

Enter your e-mail address:

Password:

Western Vintage F (10/40)

« Back
Western Vintage F (10/40)

Pickup for easy installation on instruments with metal strings. Mirror chrome finish metal housing, superflat design. Variable neck/fretboard mounting. Suitable for guitars with and without soundhole.

Our 10/40 vintage pickup is mounted directly onto the end of the fingerboard. It is attached using the two bendable brackets.

All Schaller pickups are manufactured to the highest quality requirements and the most demanding quality standards:

  • In order to avoid deviations, the number of coil windings are controlled with utmost care.
  • For a constant sound quality and reduced microphonics, all relevant metal parts are made of German silver.
  • To avoid microphonic problems, all coils are vacuum-potted by means of a unique method.

Our PickupFinder with all information about musical applications, technical specifications, wiring diagrams and much more can be viewed directly on our homepage.

Versions

ArtNo. ModelModelDC-resistance/ kOhmSurfaceMeasurements l x w x h (mm)Weight g/item GEWA-No. Price
16060101
For Fretboard Mounting Nickel 74x26x9 190 SC900130 67.50 €

Images

Technical drawing

To view the complete technical drawing, please use the download file.

Note: Acrobat Reader is required to view PDF files correctly!

Installation instructions

To view the complete installation instructions, please use the download file.

Note: Acrobat Reader is required to view PDF files correctly!

Downloads

Technical drawing

Installation instructions

Note: Acrobat Reader is required to view PDF files correctly!

Here you will find some additional, useful information about our Schaller product catalog.

Schaller Pickups, Single Coils and Humbucker Schaller Pickups, Bass Pickups

Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.

 

Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).

Measurements Pickup-Cover

All measures in mm.
(The distance between the two rows of holes is always 17,5 mm.)

Metal-Cover:

Cover

Distance between
outside holes

Distance hole to hole
Hole Ø Length
Width
Height
6 Hole Bridge
50,7
10,14
5,5
70,5
39,0
15,0
6 Hole Neck
49,0
9,8
5,5
70,5
39,0
15,0
8 Hole
48,0
16,0
5,2
70,5
39,0
15,0
12 Hole Bridge
50,7
10,14
5,5
70,5
39,0
15,0
12 Hole Neck
49,0
9,8
5,5
70,5
39,0
15,0

 

 Acryl-Cover:

CoverDistance between
outside holes
Distance hole to holeHole ØLengthWidthHeight
6 Hole Bridge50,7
10,14
5,5
71,4
37,4
22,0
6 Hole Neck49,0
9,8
5,5
71,4
37,4
22,0
8 Hole48,0
16,0
5,2
71,4
37,4
22,0
12 Hole Bridge50,7
10,14
5,5
71,4
37,4
22,0
12 Hole Neck49,0
9,8
5,5
71,4
37,4
22,0

 

Additional measures of Pickup Covers can be found in the technical drawings.

Humbucking Pickups

All of our single-pole Humbucker pickups are built to fit in any common frame.
Our frames provide mounting with four height adjustment screws to prevent tilting. When winding the coils we pay special attention to the precise matching of each pair of coils – essential for ensuring 100% humbucking function.
As with our single-coil pickups, all Humbucker coils are soaked in a special process
to minimize microphone feedback.
The single-pole Humbuckers offer variable pole piece spacing at neck and bridge pickups, which permits full use of the magnetic field.
All pickups are available in Cream, Black or Cream Black (Humbuckers only).

Kinds of Strings

Steel strings can be used with all pickpus.
The following table shows which pickups can also be used with nylon/gut strings:

ArtikelgroupModelArticlenr.Nylon/Gut Strings
Oyster PickupsS/S16050201
X
Oyster PickupsS/D16050202
X
Oyster PickupsS/P16050203
X
Oyster PickupsS/P16050501
X

Our zither pickups with the article numbers 16080201 and 16080202 are designed for steel strings. If you wish to use nylon strings, please order article number 16080203, which is our piezo pickup for zither.


 

FAQ

FAQ60001 Where can I get wiring diagrams for pickups?

Please use our Pickup Finder, or take a look at the product details or under "Downloads", where we have provided all technical data and wiring diagrams in a downloadable format for your use. Multiple downloads can be found using our Pickup Finder and in the product details: technical drawings, tone descriptions, wiring diagrams etc. These will help you in finding the pickup that is right for you, as well as in installing and connecting it without any problems.