Suche starten
Sign in

Here you get access for your webmail!

Enter your e-mail address:

Password:

Guitar-Button 1-VC

« Back
Guitar-Button 1-VC

Features

  • Model: M6 Small Metal-Button
  • Finish: VintageCopper
  • g/pc.: 7
Item number
11010800
Price:
5,40 EUR

Versions

ArtNo. ModelFinishg/pc. GEWA-No. Price
11010100
M6 Small Metal-Button Nickel 7 SC506130 4.05 €
11010200
M6 Small Metal-Button Chrome 7 SC506132 4.05 €
11010300
M6 Small Metal-Button SatinChrome 7 SC506133 4.05 €
11010400
M6 Small Metal-Button BlackChrome 7 SC506134 5.40 €
11010500
M6 Small Metal-Button Gold 7 SC506136 5.40 €
11010600
M6 Small Metal-Button Ruthenium 7 SC506138 5.40 €
11010700
M6 Small Metal-Button SatinPearl 7 SC506131 4.05 €
11010800
M6 Small Metal-Button VintageCopper 7 SC506137 5.40 €
11020100
M6 Large Metal-Button Nickel 9 SC506150 4.05 €
11020200
M6 Large Metal-Button Chrome 9 SC506152 4.05 €
11020300
M6 Large Metal-Button SatinChrome 9 SC506153 4.05 €
11020400
M6 Large Metal-Button BlackChrome 9 SC506154 5.40 €
11020500
M6 Large Metal-Button Gold 9 SC506156 5.40 €
11020600
M6 Large Metal-Button Ruthenium 9 SC506158 5.40 €
11020700
M6 Large Metal-Button SatinPearl 9 SC506151 4.05 €
11020800
M6 Large Metal-Button VintageCopper 9 SC506157 5.40 €
11034100
M6 Small Perloid-Button Perloid 1 SC506120 5.40 €
11044100
M6 Large Perloid-Button Perloid 1,5 SC506122 5.40 €
11054400
M6 Small Ebony-Button Ebony 1 SC506190 5.40 €
11064400
M6 Large Ebony-Button Ebony 1,5 SC506192 5.40 €
11074700 M6 Small Galalith-Button Galalith 1 SC506196 5.40 €
11084700 M6 Large Galalith-Button Galalith 1,5 SC506198 5.40 €
11094800 M6 Small Polybone-Button Polybone 1 SC506206 5.40 €
11104800 M6 Large Polybone-Button Polybone 1,5 SC506208 5.40 €
11130100
M6 Vintage-Button Nickel 12,6 SC506160 5.40 €
11130200
M6 Vintage-Button Chrome 12,6 SC506162 5.40 €
11130300
M6 Vintage-Button SatinChrome 12,6 SC506163 5.40 €
11130400
M6 Vintage-Button BlackChrome 12,6 SC506164 8.10 €
11130500
M6 Vintage-Button Gold 12,6 SC506166 8.10 €
11130600
M6 Vintage-Button Ruthenium 12,6 SC506168 8.10 €
11130700
M6 Vintage-Button SatinPearl 12,6 SC506161 5.40 €
11130800
M6 Vintage-Button VintageCopper 12,6 SC506167 8.10 €
11140100
M6 Vintage-Step-Button Nickel 7,8 SC506140 5.40 €
11140200
M6 Vintage-Step-Button Chrome 7,8 SC506142 5.40 €
11140300
M6 Vintage-Step-Button SatinChrome 7,8 SC506143 5.40 €
11140400
M6 Vintage-Step-Button BlackChrome 7,8 SC506144 8.10 €
11140500
M6 Vintage-Step-Button Gold 7,8 SC506146 8.10 €
11140600
M6 Vintage-Step-Button Ruthenium 7,8 SC506148 8.10 €
11140700
M6 Vintage-Step-Button SatinPearl 7,8 SC506141 5.40 €
11140800
M6 Vintage-Step-Button VintageCopper 7,8 SC506147 8.10 €
11210100
M4W-Button Nickel 12,2 SC506230 6.75 €
11210200
M4W-Button Chrome 12,2 SC506232 6.75 €
11210300
M4W-Button SatinChrome 12,2 SC506233 6.75 €
11210400
M4W-Button BlackChrome 12,2 SC506234 9.45 €
11210500
M4W-Button Gold 12,2 SC506236 9.45 €
11210600
M4W-Button Ruthenium 12,2 SC506238 9.45 €
11210700
M4W-Button SatinPearl 12,2 SC506231 6.75 €
11210800
M4W-Button VintageCopper 12,2 SC506237 9.45 €
11220100
M4 Light-Button Nickel 3,8 SC506220 6.75 €
11220200
M4 Light-Button Chrome 3,8 SC506222 6.75 €
11220300
M4 Light-Button SatinChrome 3,8 SC506223 6.75 €
11220400
M4 Light-Button BlackChrome 3,8 SC506224 9.45 €
11220500
M4 Light-Button Gold 3,8 SC506226 9.45 €
11220600
M4 Light-Button Ruthenium 3,8 SC506228 9.45 €
11220700
M4 Light-Button SatinPearl 3,8 SC506221 6.75 €
11220800
M4 Light-Button VintageCopper 3,8 SC506227 9.45 €
11754100
B4-Button Perloid 2,6 SC506300 6.75 €
11764200
B4-Button Ebonite Black 2,5 SC506302 6.75 €
11774500
B4-Button Galalith 2,7 SC506304 6.75 €
11784100
B5-Button Perloid 2,9 SC506310 6.75 €
11794200
B5-Button Ebonite Black 3 SC506312 6.75 €
11804500
B5-Button Galalith 3 SC506314 6.75 €

Images

Machine Heads combination

Here are all conceivable combinations of left and right tuning heads and the desired numbers of each which are available to order.
All machine heads and buttons can also be ordered individually.

Kopfplatte 2-2Kopfplatte 3-1Kopfplatte 3-2
Headstock 2-2Headstock 3-1Headstock 3-2
Kopfplatte 4-0Kopfplatte 4-1Kopfplatte 4-2
Headstock 4-0Headstock 4-1Headstock 4- 2
Kopfplatte 4-3Kopfplatte 5-0Kopfplatte 5-1
Headstock 4-3Headstock 5-0Headstock 5-1
Kopfplatte 5-2Kopfplatte 6-0Kopfplatte 6-1
Headstock 5-2Headstock 6-0Headstock 6-1
Kopfplatte 7-0Kopfplatte Les Paul
Headstock 7-0Headstock Les Paul
 

 

 

Here you will find some additional, useful information about our Schaller product catalog.

 

Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.

 

Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).

 

 

Machine Heads combination

Here are all conceivable combinations of left and right tuning heads and the desired numbers of each which are available to order.
All machine heads and buttons can also be ordered individually. All conceivable combinations are depicted here, irrespective of the type of guitar or bass.

Every other possible combination for 8-string / 12-string instruments etc. is also possible, of course.

The following machine heads can be easily mounted from left to right or interchangeably, from right to left: BM and BMF

For the sake of simplicity, the images show only one machine head of the relevant type, either as a left or right-side model. This means that a right-side machine head model may be depicted for the "6-in-line" combination; in such cases, however, the machine head can of course be ordered both as a left and right-side model.

Kopfplatte 2-2Kopfplatte 3-1Kopfplatte 3-2
Headstock 2-2Headstock 3-1Headstock 3-2
Kopfplatte 4-0Kopfplatte 4-1Kopfplatte 4-2
Headstock 4-0Headstock 4-1Headstock 4- 2
Kopfplatte 4-3Kopfplatte 5-0Kopfplatte 5-1
Headstock 4-3Headstock 5-0Headstock 5-1
Kopfplatte 5-2Kopfplatte 6-0Kopfplatte 6-1
Headstock 5-2Headstock 6-0Headstock 6-1
Kopfplatte 7-0Kopfplatte Les Paul
Headstock 7-0Headstock 3+3

 

FAQ

FAQ10001 Can I also get machine heads in a 5/1 or 4/2 configuration?

For the sake of clarity, we have only illustrated the standard layouts. Naturally, every other combination (5/1, 4/2 etc.) can also be ordered via your retailer.

FAQ10010 How can you tell the difference between left-side and right-side machine heads?
A simple way to tell the difference is to place a machine head in front of you so that the back of the housing is facing towards you and the button is pointing upwards. If the worm gear and button are then on the left of the housing, then it is a left-side machine head, e.g. as found on a Stratocaster.
FAQ10030 Where can I find information on the required hole diameters on the head plate for Schaller machine heads?

On our website, under "Products/Product help/Guidelines", we have set up a table from which you can see the relevant measures for your machine heads.

Under "Products" and then in the detailed view you will of course find a detailed table for each of our products, showing the bore diameter in one of the columns.

The "Technical drawings" tab in the product details view gives you access to full technical drawings of the product in question, complete with all dimensions. These drawings can also be downloaded.

FAQ10040 Where can I find information on the different mounting options of your machine heads (screw lug, pin, etc.)?

On our website, under "Products/Product help/Guidelines", we have set up a table from which you can see the respective designs.

FAQ10050 What do I need to consider when using Schaller machine heads "6 in line" for my left-handed guitar?
Please order 6 right or 6 left machine heads, depending on your preference and the arrangement on the head plate.
FAQ10065 In your product catalog, what does the transmission ratio mean for the machine heads?
If, for example, you have a machine head with a transmission ratio of 1:18, this means that you will have to turn the button 18 times to turn the adjusting axis once.
FAQ10070 After several years of use my machine heads are hard to turn; what can I do?

We recommend the following procedure:

  1. Change the mounting screw of the button.
  2. Check the plastic or wave washer at the button for wear and renew if required.
  3. With the machine heads closed, carefully oil with light precision mechanics oil at the shaft or gears, with the machine heads open, carefully oil the mechanical parts.
FAQ10100 I have seen "I", "II" und "III" symbols or markings on the inside of the Schaller machine heads. What do they mean?
These markings have no significance at all for you or for the function of the Schaller machine head. For us they designate the individual machine molds so that we are better able to isolate the cause of a problem in the event of a material defect. Of course, no product leaves the Schaller premises without having been checked and approved by our multi-stage quality control.
FAQ10110 Can I modify machine heads myself and, if yes, which ones in order to to be able to use left machine heads as right machine heads and vice versa?
This is only possible in isolated cases with some bass machine heads. We do not generally recommend such practices, however, because the product specifics are usually not taken into consideration and this can lead to defective assembly.
FAQ10120 I need machine heads for my concert guitar with a 36mm wave washer and not the normal 35mm. What do I do?
In this particular case we recommend you use our GrandTune, M6 or M6 Mini machine heads without the base plate. This way you have high quality machine heads and can select the shaft distance as you wish. You can use shafts for steel or nylon strings.
FAQ10130 I am looking for "Reverse Headstock" machine heads, and instead of the normal 6 left, I need 6 right machine heads. Where can I get them?

Please simply order them. We can easily supply any combination, including 6 right machine heads (please see under Products/Product help/Guidelines).

FAQ10140 How exactly is the Schaller Banjo tension peg B4 adjustable?

It works like a D-tuner. You tune a note, setting it with a knurled thumb screw. With the second knurled thumb screw you adjust the required deeper string note. When you loosen the 1st knurled thumb screw the machine head then automatically turns to the second set note.

Please find more information in the productdetails of our B4 D-Tuner.

FAQ10160 How do the Schaller clamp machine heads / locking tuners work?

These function like normal tuners but you do not need to wrap the strings around the shaft at the beginning. You position the string in the shaft hole with the clamp screw loosened, shorten the string approx. 10 mm behind the shaft, clamp the string with the clamp screw and tune the string (please see under Service/Lexicon).

FAQ10170 How can I clean Schaller BM Light machine heads with plastic housing?
Our plastic is reinforced with carbon fiber, so you can clean them using car polish or key oil.
FAQ10180 I have two sets of Schaller machine heads, but I have realized that the buttons are of different sizes.
Our tuning heads are fitted as standard with large buttons for 3/3 configuration and small buttons for 6-in-line configuration.
FAQ10190 Can I fit a set of Schaller "mini" machine heads with the buttons from a set of normal-sized machine heads?
Yes, you can do that - the shaft has the same diameter, so you just need a longer screw. However, you need to pay attention to the appearance and to the spacing between the machine heads, which they require in order to turn and which obviously becomes smaller.
FAQ10240 Can I use steel strings with Schaller's acoustic guitar machine heads?

Yes, you can. Our machine heads are designed for this purpose. Please use either the solid port or slotted port (see Products/Guideline). For our nylon shafts, we recommend using nylon or gut strings.

FAQ10260 Do Schaller's sealed/enclosed machine heads need to be oiled from time to time?

All sealed tuners are lubricated with Schaller special grease, for a lifetime of maintenance-free service

FAQ10270 I have a MusicMan bass machine head produced by Schaller, and the shaft is slightly shorter than the original Schaller BM bass machine head. Can I replace the shaft?

Yes, you can use the Music Man shaft with buttons on the Schaller bass machine head and vice-versa, i.e. you can use the slightly longer Schaller shafts on the Music Man bass machine head.