Suche starten
Sign in

Here you get access for your webmail!

Enter your e-mail address:

Password:

Guitar-Button 2-NI

« Back
Guitar-Button 2-NI

Easy guide to find the matching button for your machine head:

(1) Button numbers 1-NI, 1-CH … to … 14-VC for all guitar tuners with screwable button attachments;

(2) Button numbers 20-NI, 20-CH … to … 22-VC for all bass tuners with screwable attachments;

(3) Button numbers 26-NI to 26-VC only for the M4S bass tuner;

(4) Button numbers 24-A to 26 for all banjo tuners (B4 and B5) and for ukulele tuners.

Note: Glued buttons on tuners like ST6, Keystone DR, Classic Lyra, Hauser and Standard tuners as well as mandolins and pressed-in/non-removable buttons like on BM, BMFL and M4S can't be exchanged.

The buttons on all other machine heads are attached with screws, which means that all of the screw-fastening buttons mentioned above can be used with them.

Guitar buttons can also be used on the M4 and M4-2000 bass machine heads.

All wood buttons are made of real wood, unless "synthetic wood" is specified.

Features

  • Button-description: 2-NI
  • Model: M6 Large Metal-Button
  • Finish: Nickel
  • g/pc.: 11,8
Item number
11020100
Price:
4,05 EUR

Versions

ArtNo. Button-descriptionModelFinishg/pc. GEWA-No. Price
11010100
1-NI M6 Small Metal-Button Nickel 6,8 SC506130 4.05 €
11010200
1-CH M6 Small Metal-Button Chrome 6,8 SC506132 4.05 €
11010300
1-SC M6 Small Metal-Button SatinChrome 6,8 SC506133 4.05 €
11010400
1-BC M6 Small Metal-Button BlackChrome 6,8 SC506134 5.40 €
11010500
1-GO M6 Small Metal-Button Gold 6,8 SC506136 5.40 €
11010600
1-RU M6 Small Metal-Button Ruthenium 6,8 SC506138 5.40 €
11010700
1-SP M6 Small Metal-Button SatinPearl 6,8 SC506131 4.05 €
11010800
1-VC M6 Small Metal-Button VintageCopper 6,8 SC506137 5.40 €
11020100
2-NI M6 Large Metal-Button Nickel 11,8 SC506150 4.05 €
11020200
2-CH M6 Large Metal-Button Chrome 11,8 SC506152 4.05 €
11020300
2-SC M6 Large Metal-Button SatinChrome 11,8 SC506153 4.05 €
11020400
2-BC M6 Large Metal-Button BlackChrome 11,8 SC506154 5.40 €
11020500
2-GO M6 Large Metal-Button Gold 11,8 SC506156 5.40 €
11020600
2-RU M6 Large Metal-Button Ruthenium 11,8 SC506158 5.40 €
11020700
2-SP M6 Large Metal-Button SatinPearl 11,8 SC506151 4.05 €
11020800
2-VC M6 Large Metal-Button VintageCopper 11,8 SC506157 5.40 €
11034100
M6 Small Perloid-Button Perloid 1 SC506120 5.40 €
11044100
M6 Large Perloid-Button Perloid 2,2 SC506122 5.40 €
11054400
M6 Small Ebony-Button Ebony 2,2 SC506190 5.40 €
11064400
M6 Large Ebony-Button Ebony 2,7 SC506192 5.40 €
11034700 M6 Small Galalith-Button Galalith SC506196 5.40 €
11044700 M6 Large Galalith-Button Galalith SC506198 5.40 €
11034800 M6 Small Polybone-Button Polybone SC506206 5.40 €
11044800 M6 Large Polybone-Button Polybone SC506208 5.40 €
11070100
10-NI Knurled Knob Nickel 3,8 SC506180 5.40 €
11070200
10-CH Knurled Knob Chrome 3,8 SC506182 5.40 €
11070300
10-SC Knurled Knob SatinChrome 3,8 SC506183 5.40 €
11070400
10-BC Knurled Knob BlackChrome 3,8 SC506184 8.10 €
11070500
10-GO Knurled Knob Gold 3,8 SC506186 8.10 €
11070600
10-RU Knurled Knob Ruthenium 3,8 SC506188 8.10 €
11070700
10-SP Knurled Knob SatinPearl 3,8 SC506181 5.40 €
11070800
10-VC Knurled Knob VintageCopper 3,8 SC506187 8.10 €
11080100
11-NI M6 Tulip-Button Nickel 9,9 SC506170 5.40 €
11080200
11-CH M6 Tulip-Button Chrome 9,9 SC506172 5.40 €
11080300
11-SC M6 Tulip-Button SatinChrome 9,9 SC506173 5.40 €
11080400
11-BC M6 Tulip-Button BlackChrome 9,9 SC506174 8.10 €
11080500
11-GO M6 Tulip-Button Gold 9,9 SC506176 8.10 €
11080600
11-RU M6 Tulip-Button Ruthenium 9,9 SC506178 8.10 €
11080700
11-SP M6 Tulip-Button SatinPearl 9,9 SC506171 5.40 €
11080800
11-VC M6 Tulip-Button VintageCopper 9,9 SC506177 8.10 €
11090100
13-NI M6 Vintage-Button Nickel 12,6 SC506160 5.40 €
11090200
13-CH M6 Vintage-Button Chrome 12,6 SC506162 5.40 €
11090300
13-SC M6 Vintage-Button SatinChrome 12,6 SC506163 5.40 €
11090400
13-BC M6 Vintage-Button BlackChrome 12,6 SC506164 8.10 €
11090500
13-GO M6 Vintage-Button Gold 12,6 SC506166 8.10 €
11090600
13-RU M6 Vintage-Button Ruthenium 12,6 SC506168 8.10 €
11090700
13-SP M6 Vintage-Button SatinPearl 12,6 SC506161 5.40 €
11090800
13-VC M6 Vintage-Button VintageCopper 12,6 SC506167 8.10 €
11100100
14-NI M6 Vintage-Step-Button Nickel 7,8 SC506140 5.40 €
11100200
14-CH M6 Vintage-Step-Button Chrome 7,8 SC506142 5.40 €
11100300
14-SC M6 Vintage-Step-Button SatinChrome 7,8 SC506143 5.40 €
11100400
14-BC M6 Vintage-Step-Button BlackChrome 7,8 SC506144 8.10 €
11100500
14-GO M6 Vintage-Step-Button Gold 7,8 SC506146 8.10 €
11100600
14-RU M6 Vintage-Step-Button Ruthenium 7,8 SC506148 8.10 €
11100700
14-SP M6 Vintage-Step-Button SatinPearl 7,8 SC506141 5.40 €
11100800
14-VC M6 Vintage-Step-Button VintageCopper 7,8 SC506147 8.10 €
11210100
20-NI M4-Button Nickel 17,3 SC506240 6.75 €
11210200
20-CH M4-Button Chrome 17,3 SC506242 6.75 €
11210300
20-SC M4-Button SatinChrome 17,3 SC506243 6.75 €
11210400
20-BC M4-Button BlackChrome 17,3 SC506244 9.45 €
11210500
20-GO M4-Button Gold 17,3 SC506246 9.45 €
11210600
20-RU M4-Button Ruthenium 17,3 SC506248 9.45 €
11210700
20-SP M4-Button SatinPearl 17,3 SC506241 6.75 €
11210800
20-VC M4-Button VintageCopper 17,3 SC506247 9.45 €
11220100
21-NI M4W-Button Nickel 12,2 SC506230 6.75 €
11220200
21-CH M4W-Button Chrome 12,2 SC506232 6.75 €
11220300
21-SC M4W-Button SatinChrome 12,2 SC506233 6.75 €
11220400
21-BC M4W-Button BlackChrome 12,2 SC506234 9.45 €
11220500
21-GO M4W-Button Gold 12,2 SC506236 9.45 €
11220600
21-RU M4W-Button Ruthenium 12,2 SC506238 9.45 €
11220700
21-SP M4W-Button SatinPearl 12,2 SC506231 6.75 €
11220800
21-VC M4W-Button VintageCopper 12,2 SC506237 9.45 €
11230100
22-NI M4 Light-Button Nickel 3,8 SC506220 6.75 €
11230200
22-CH M4 Light-Button Chrome 3,8 SC506222 6.75 €
11230300
22-SC M4 Light-Button SatinChrome 3,8 SC506223 6.75 €
11230400
22-BC M4 Light-Button BlackChrome 3,8 SC506224 9.45 €
11230500
22-GO M4 Light-Button Gold 3,8 SC506226 9.45 €
11230600
22-RU M4 Light-Button Ruthenium 3,8 SC506228 9.45 €
11230700
22-SP M4 Light-Button SatinPearl 3,8 SC506221 6.75 €
11230800
22-VC M4 Light-Button VintageCopper 3,8 SC506227 9.45 €
11240100
26-NI M4S-Button Nickel 18,6 SC506250 6.75 €
11240200
26-CH M4S-Button Chrome 18,6 SC506252 6.75 €
11240300
26-SC M4S-Button SatinChrome 18,6 SC506253 6.75 €
11240400
26-BC M4S-Button BlackChrome 18,6 SC506254 9.45 €
11240500
26-GO M4S-Button Gold 18,6 SC506256 9.45 €
11240600
26-RU M4S-Button Ruthenium 18,6 SC506258 9.45 €
11240700
26-SP M4S-Button SatinPearl 18,6 SC506251 6.75 €
11240800
26-VC M4S-Button VintageCopper 18,6 SC506257 9.45 €
11504100
24-A B4-Button Perloid 2,6 SC506300 6.75 €
11504200
24-B B4-Button Ebonite Black 2,5 SC506302 6.75 €
11504500
24-EL B4-Button Galalith 2,7 SC506304 6.75 €
11514100
25-A B5-Button Perloid 2,9 SC506310 6.75 €
11514200
25-B B5-Button Ebonite Black 3 SC506312 6.75 €
11514500
25-EL B5-Button Galalith 3 SC506314 6.75 €

Images

Machine Heads combination

Here are all conceivable combinations of left and right tuning heads and the desired numbers of each which are available to order.
All machine heads and buttons can also be ordered individually.

Kopfplatte 2-2Kopfplatte 3-1Kopfplatte 3-2
Headstock 2-2Headstock 3-1Headstock 3-2
Kopfplatte 4-0Kopfplatte 4-1Kopfplatte 4-2
Headstock 4-0Headstock 4-1Headstock 4- 2
Kopfplatte 4-3Kopfplatte 5-0Kopfplatte 5-1
Headstock 4-3Headstock 5-0Headstock 5-1
Kopfplatte 5-2Kopfplatte 6-0Kopfplatte 6-1
Headstock 5-2Headstock 6-0Headstock 6-1
Kopfplatte 7-0Kopfplatte Les Paul
Headstock 7-0Headstock Les Paul
 

 

 

Here you will find some additional, useful information about our Schaller product catalog.

 

Measure specifications

All measurements in the product catalogue are given in mm (inch), unless a different unit of measurement is stated.

 

Technical drawings and operating instructions

We do not accept any liability for the correctness of the technical drawings. Prior to installation, please measure for yourself once more, so you can consider regular manufacturing tolerances.

Please note that the technical data can also vary slightly, depending on the surface color. This is due to the difference in the galvanic coating and the galvanic layering, which depends on the color (nickel, chrome etc).

The technical drawings can be printed on one page width. Should the technical drawings not fit on one page, however, please check your print page setup (note: they can be several pages long).

 

 

Some image examples:

screw lug 90 degreesscrew lug 90 degrees centeredscrew lug 135 degrees
screw lug 180 degrees2 screws centered2 screws offset
2 screws4 screws2 screw lug 90/270 degrees offset

 

Machine Heads combination

Here are all conceivable combinations of left and right tuning heads and the desired numbers of each which are available to order.
All machine heads and buttons can also be ordered individually. All conceivable combinations are depicted here, irrespective of the type of guitar or bass.

Every other possible combination for 8-string / 12-string instruments etc. is also possible, of course.

The following machine heads can be easily mounted from left to right or interchangeably, from right to left: BM and BMF

For the sake of simplicity, the images show only one machine head of the relevant type, either as a left or right-side model. This means that a right-side machine head model may be depicted for the "6-in-line" combination; in such cases, however, the machine head can of course be ordered both as a left and right-side model.

Kopfplatte 2-2Kopfplatte 3-1Kopfplatte 3-2
Headstock 2-2Headstock 3-1Headstock 3-2
Kopfplatte 4-0Kopfplatte 4-1Kopfplatte 4-2
Headstock 4-0Headstock 4-1Headstock 4- 2
Kopfplatte 4-3Kopfplatte 5-0Kopfplatte 5-1
Headstock 4-3Headstock 5-0Headstock 5-1
Kopfplatte 5-2Kopfplatte 6-0Kopfplatte 6-1
Headstock 5-2Headstock 6-0Headstock 6-1
Kopfplatte 7-0Kopfplatte Les Paul
Headstock 7-0Headstock Les Paul

 

FAQ

FAQ10001 Can I also get machine heads in a 5/1 or 4/2 configuration?

For the sake of clarity, we have only illustrated the standard layouts. Naturally, every other combination (5/1, 4/2 etc.) can also be ordered via your retailer.

…in addition to this, individual machine heads, sets of buttons etc. can also be ordered.

FAQ10010 How can you tell the difference between left-side and right-side machine heads?
A simple way to tell the difference is to place a machine head in front of you so that the back of the housing is facing towards you and the button is pointing upwards. If the worm gear and button are then on the left of the housing, then it is a left-side machine head, e.g. as found on a Stratocaster.
FAQ10020 I know that you produce machine heads for many reputable manufacturers such as Fender, Gibson, PRS, etc. with their company logo. What can I do, if one of these machine heads breaks?
Unfortunately we are not allowed to provide you with a replacement part. Please contact the manufacturer directly. Alternatively, we can only recommend you to install a set of Schaller machine heads from your specialist dealer. Then you will always have 100% quality - since today, unfortunately, almost all manufacturers also use products with their logo from the Far East.
FAQ10030 Where can I find information on the required hole diameters on the head plate for Schaller machine heads?

On our website, under "Products/Product help/Guidelines", we have set up a table from which you can see the relevant measures for your machine heads.

Under "Products" and then in the detailed view you will of course find a detailed table for each of our products, showing the bore diameter in one of the columns.

The "Technical drawings" tab in the product details view gives you access to full technical drawings of the product in question, complete with all dimensions. These drawings can also be downloaded.

FAQ10040 Where can I find information on the different mounting options of your machine heads (screw lug, pin, etc.)?

On our website, under "Products/Product help/Guidelines", we have set up a table from which you can see the respective designs.

FAQ10050 What do I need to consider when using Schaller machine heads "6 in line" for my left-handed guitar?
Please order 6 right or 6 left machine heads, depending on your preference and the arrangement on the head plate.
FAQ10060 Which are the methods available for mounting Schaller machine heads onto the head plate?

There are 3 methods:

  1. Fastening with screws with or without thrust bearing;
  2. Fastening with screws and banjo bold. Here, the banjo bolt is an additional fastening and thrust bearing at the same time.
  3. Fastening only with banjo bolt and pin.

The pin or pins (2 in our Fender machine heads) are only used to prevent machine head twisting. See also the reference table under Products/Product help/Guidlines.

FAQ10065 In your product catalog, what does the transmission ratio mean for the machine heads?
If, for example, you have a machine head with a transmission ratio of 1:16, this means that you will have to turn the button 16 times to turn the adjusting axis once.
FAQ10070 After several years of use my machine heads are hard to turn; what can I do?

We recommend the following procedure:

  1. Change the mounting screw of the button.
  2. Check the plastic or wave washer at the button for wear and renew if required.
  3. With the machine heads closed, carefully oil with light precision mechanics oil at the shaft or gears, with the machine heads open, carefully oil the mechanical parts.
FAQ10080 I saw machine heads bearing the "S" from Schaller and "Made in Germany" on the D-Tuner device from the U.S. company Hipshot. How's that?
We produce the machine heads for Hipshot, while Hipshot produces the "D-Tuner" itself, but the machine heads are original Schaller parts.
FAQ10100 I have seen "I", "II" und "III" symbols or markings on the inside of the Schaller machine heads. What do they mean?
These markings have no significance at all for you or for the function of the Schaller machine head. For us they designate the individual machine molds so that we are better able to isolate the cause of a problem in the event of a material defect. Of course, no product leaves the Schaller premises without having been checked and approved by our multi-stage quality control.
FAQ10110 Can I modify machine heads myself and, if yes, which ones in order to to be able to use left machine heads as right machine heads and vice versa?
This is only possible in isolated cases with some bass machine heads. We do not generally recommend such practices, however, because the product specifics are usually not taken into consideration and this can lead to defective assembly.
FAQ10120 I need machine heads for my concert guitar with a 36mm wave washer and not the normal 35mm. What do I do?
In this particular case we recommend you use our GrandTune, M6 or M6 Mini machine heads without the base plate. This way you have high quality machine heads and can select the shaft distance as you wish. You can use shafts for steel or nylon strings.
FAQ10130 I am looking for "Reverse Headstock" machine heads, and instead of the normal 6 left, I need 6 right machine heads. Where can I get them?

Please simply order them from a specialist dealer. We can easily supply any combination, including 6 right machine heads (please see under Products/Product help/Guidelines).

FAQ10140 How exactly is the Schaller Banjo tension peg B4 adjustable?

It works like a D-tuner. You tune a note, setting it with a knurled thumb screw. With the second knurled thumb screw you adjust the required deeper string note. When you loosen the 1st knurled thumb screw the machine head then automatically turns to the second set note.

Please find more information in the productdetails of our B4 D-Tuner.

FAQ10150 What does Schaller recommend for cleaning the tarnished tuning buttons on chrome-plated bass machine heads?
A difficult one: give it a careful try with a chrome polish. If the buttons are already too heavily tarnished, usually due to hand perspiration, then replacement is the only option.
FAQ10160 How do the Schaller clamp machine heads / locking tuners work?

These function like normal tuners but you do not need to wrap the strings around the shaft at the beginning. You position the string in the shaft hole with the clamp screw loosened, shorten the string approx. 10 mm behind the shaft, clamp the string with the clamp screw and tune the string (please see under Service/Lexicon).

FAQ10170 How can I clean Schaller BM Light machine heads with plastic housing?
Our plastic is reinforced with carbon fiber, so you can clean them using car polish or key oil.
FAQ10180 I have two sets of Schaller machine heads, but I have realized that the buttons are of different sizes.
Our tuning heads are fitted as standard with large buttons for 3/3 configuration and small buttons for 6-in-line configuration.
FAQ10190 Can I fit a set of Schaller "mini" machine heads with the buttons from a set of normal-sized machine heads?
Yes, you can do that - the shaft has the same diameter, so you just need a longer screw. However, you need to pay attention to the appearance and to the spacing between the machine heads, which they require in order to turn and which obviously becomes smaller.
FAQ10220 Are the screws supplied for fixing the buttons to the housing the same color as the buttons?
In general yes, except in cases such as bicolor products or ebony buttons.
FAQ10230 I have fitted Schaller M6 locking machine heads to a Gibson headstock which is very thick; the problem is that the shaft with the hole only protrudes very slightly. What can I do about this?
In such cases, please order our Schaller M6 2000 locking machine heads with the special shaft length, which is 21mm rather than 18.5 or 19.5mm (staggered).
FAQ10240 Can I use steel strings with Schaller's acoustic guitar machine heads?

Yes, you can. Our machine heads are designed for this purpose. Please use either the Gibson or Emberger-type shaft (see Products/Guideline). For our nylon shafts, we recommend using nylon or gut strings.

FAQ10260 Do Schaller's sealed/enclosed machine heads need to be oiled from time to time?

All sealed tuners are lubricated with Schaller special grease, for a lifetime of maintenance-free service

FAQ10270 I have a MusicMan bass machine head produced by Schaller, and the shaft is slightly shorter than the original Schaller BM bass machine head. Can I replace the shaft?

Yes, you can use the Music Man shaft with buttons on the Schaller bass machine head and vice-versa, i.e. you can use the slightly longer Schaller shafts on the Music Man bass machine head.